Industrial Heat Treatment Furnace

1. 950℃ Bogie-hearth Resistance Furnace

Main Parameters

Note: Our Company can customize and produce the 1200bogie-hearth resistance furnace according to the requirements of the user. (The chamber dimension shall be provided by the user.)

2. 1200℃ Box-type Resistance Furnace

(1) Purposes

This box-type resistance furnace can be used in the heating and the quenching of the metal parts or the alloy steel parts in the air.

(2) Main Technical Parameters

III. Brief Introduction to the Structure

This resistance furnace is mainly composed of the furnace casing, the furnace lining, the heating elements, the elevator mechanism of the furnace door and the electric control system.
1. The furnace casing is welded and formed by the shaped steel and the steel plate with excellent appearance and fixed stiffness.
2. The high aluminum brick is built in the inner layer of the furnace lining, the light weight fireclay brick in the intermediate layer, and the thermal insulation packing material in the outer layer.
3. The heating elements are coiled into the spiral shape through the 0Cr21Al6Nb high-temperature resistance wire and arranged on the two sides and the bottom of the chamber.
4. Elevator mechanism of the furnace door: the furnace door is composed of the furnace door, the rope pulley, the bearing, the sprocket wheel, the balanced weight and the compressing apparatus of the furnace door. In order to guarantee the operational safety, the travel switch is installed on the furnace door and linked with the rising and falling of the furnace door. When the furnace door is open, the power supply of the resistance furnace is automatically turned on, so the safety of the operator can be guaranteed.
5. Electric control system: the imported intelligent self-adapting PlD temperature controller whose model is XW一9 is adopted to control the temperature, the 4-stage slope + the heat-insulated procedures are adopted, and the current with 4 to 20 MA is output to the cyclic wave controller. The continuous regulation can control the output power of the silicon controlled DC voltage-stabilized source to achieve the purpose of controlling the temperature, so the stability of the chamber temperature can be guaranteed. Once the temperature is exceeded, the major heating loop can be disconnected immediately by using a miniature-type rely to drive the alternating current contactor to guarantee the stability of the temperature. The inner circular chart recorder of Dahua Group in Shanghai is adopted to record the temperature, so the furnace temperature technology curve can be recorded at any time.